objectivesThe Introduction to NFPA 70E (2018) for All Industries online safety course is designed specifically to address the importance of electrical safety in the workplace. Participants can expect to learn about the National Fire Protection Association (NFPA) and why the NFPA 70E was developed. Additionally, training includes an intermediate-level overview of the concepts of arc flash, approach boundaries, and risk assessments, as well as warning labels, and personal protective equipment (PPE).
This course introduces participants to the NFPA 70E, sharing the hazards involved with working around electrical dissemination systems with currents greater than 50 volts. Significant changes were made in the 2018 edition of the NFPA 70E and include the following:
Updates to procedures governing creating appropriate risk assessments
Increased emphasis on the use of the hierarchy of risk controls when evaluating and implementing controls
More logical step-by-step guidelines in Article 120 for establishing an electrically safe work condition
Modifications to the arc flash hazard identification table to make it available to both incident energy analysis and PPE category methods for determining the likelihood of an arc flash
OSHA Education School’s Introduction to NFPA 70E (2018) for All Industries online course primarily covers the identification of and necessary protection from electrical safety hazards leading to arc flash, as well as how to establish an electrically safe work condition as outlined in the NFPA 70E standard, which was updated in 2018. Specific course topics include the following:
Overview of NFPA 70E (2018)
Changes to the 2018 edition & their reasoning
Electrical safety program
Qualified persons
Work involving electrical hazards
PPE and associated equipment
Specific industry terms covered throughout the course include the following:
NFPA and NFPA 70E
Arc flash
PPE
Limited and restricted approach boundaries
Limits of approach
Electrically safe work conditions
Electrical safety program
Host and contract employers
Qualified and unqualified persons
Shock risk assessment
Arc flash risk assessment, incident energy method & PPE category method
descriptionNFPA 70E requirements for safe work practices to protect personnel by reducing exposure to major electrical hazards. Originally developed at OSHA's request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities due to shock, electrocution, arc flash, and arc blast, and assists in complying with OSHA 1910 Subpart S and OSHA 1926 Subpart K.The Introduction to NFPA 70E (2018) for All Industries digital safety course is meant to emphasize the critical nature of workplace electrical safety. Participants may anticipate learning about the National Fire Protection Association (NFPA) and the rationale for the development of NFPA 70E. Additionally, training covers topics such as arc flash, approach boundaries, and risk assessments, as well as warning labels and personal protection equipment (PPE).
You must score at least 70% to pass this OSHA training. You will be given up to THREE opportunities to pass the quizzes and final exam.
Failure to pass quizzes and the final exam will result in being locked out of this online training program, but the learner can repurchase and start back from the beginning.
Upon completing this Introduction To NFPA 70E (2018) For All Industries and the accompanying survey, you will receive an OSHA card from the provider of this OSHA training on behalf of the Department of Labor.
Students who successfully complete the program will receive a completion card issued by the U.S. Department of Labor.
YOU MUST COMPLETE THE SURVEY AT THE END OF THIS TRAINING TO RECEIVE YOUR DOL CARD
outline1. Introduction to NFPA 70E (2018)
Introduction to NFPA 70E (2018)
Learning Objectives
2. Overview of NFPA 70E
Overview of NFPA 70E
OSHA Regulations
NFPA and NFPA 70E
NEC Versus NFPA 70E
Outline of NFPA 70E
Chapter 1, Safety-Related Work Practices
Chapter 2, Safety-Related Maintenance Requirements
Chapter 3, Safety Requirements for Special Equipment
Informative Annexes A-Q
3. Changes to 2018 Edition
Changes to 2018 Edition
Human Factors, Hierarchy of Controls
New Arc Flash Tables and PPE Guidance
Definitions, Article 120 Changes
Batteries, Lasers, ESA
4. Electrical Safety Program
Electrical Safety Program (ESP)
Hazard Elimination
Audit of ESP and Field Work
Employer Responsibilities
Host Employer
Contract Employer
Additional Contract Employer Responsibilities
Illumination
Electrically Safe Work Condition
Audit of LOTO Program and Procedures
Training
Retraining
LOTO Training
Emergency Response Training
Unqualified Persons Training
Qualified Persons Training
5. Qualified Persons
Qualified Persons
Qualified Person Criteria
Qualified Person Knowledge and Skills
6. Work Involving Electrical Hazards
Work Involving Electrical Hazards
Shock and Arc Flash Risk Assessments
Energized Electrical Work Permit
Elements of a Work Permit
Arc Flash Risk Assessment and Boundary
Limits of Approach Boundaries
Limited and Restricted Approach Boundaries
Three Limits of Approach
Equipment Labels
Alerting Techniques
7. PPE and Equipment
PPE and Equipment
PPE Standards Conformity
Arc Flash PPE Selection
Arc Flash PPE Category Method
Test Instruments, Equipment, and Accessories
Insulated Equipment
Inspection and Testing
8. Summary
Summary
Conclusion
Benefits OSHA Education School’s Introduction to NFPA 70E (2018) for All Industries is an intermediate online safety course providing introductory-level information for those potentially exposed to the hazards of electrical work. While describing basic requirements governing protecting workers from such electrical hazards, participants can expect a course fully updated for the 2018 edition of the NFPA 70E. Upon successful completion of this course, participants can expect to:
Recognize the history and purpose of the NFPA and the 2018 NFPA 70E standard
Identify responsibilities and training requirements for qualified and unqualified persons
Recognize what is required to achieve an electrically safe work condition through an effective safety program
Identify safeguards and controls for work involving electrical hazards, including the use of PPE, labels, warnings, and barricades
Identify host employer and contractor responsibilities as required by the NFPA 70E