objectivesFrom building roads to long-shoring operations, construction workers often rely on heavy equipment on the job site. OSHA 29 CFR 1926, Subpart O for Motor Vehicles and Mechanized Equipment, and Marine Operations addresses the dangers posed by these vehicles and machines to ensure that employees stay safe on the job when motorized equipment is required. The Subpart O: Motor Vehicles, Mechanized Equipment course from OSHA Education School explains safe work practices and regulations for motorized and heavy equipment used in construction and marine operations to help reduce risk and minimize injuries, illnesses, and fatalities.
During the Subpart O: Motor Vehicles, Mechanized Equipment course students will learn more about how to stay safe on construction or marine job sites in the presence of vehicles and heavy machinery. Course topics include:
General safety requirements for construction and marine worksites
Common equipment, including earthmoving, pile driving, and site clearing equipment, sonic guided grading systems, Jacob’s ladders, and boom hoist cables
The health dangers associated with dust, including pneumoconiosis
Dust control
Fugitive dust
Safety equipment, including personal protective equipment (PPE) and rollover protective structures (ROPS)
The role of an OSHA Qualified Person
Course participants will also have access to definitions for key terms and case studies to reinforce learning.
descriptionConstruction workers frequently rely on heavy equipment on the working site, from building roads to long-shoring activities. OSHA 29 CFR 1926, Subpart O for Motor Vehicles and Mechanized Equipment, and Marine Operations, covers the risks posed by these vehicles and machinery in order to guarantee employee safety when motorised equipment is necessary. The OSHA Education School's Subpart O: Motor Vehicles, Mechanized Equipment course discusses safe work practises and standards for motorised and heavy equipment used in construction and maritime activities, with the goal of reducing risk and preventing injuries, illnesses, and fatalities. Students will get a better understanding of how to be safe on construction and maritime job sites when automobiles and heavy machinery are present.
You must score at least 70% to pass this OSHA 1 training. You will be given up to THREE opportunities to pass the quizzes and final exam.
Failure to pass quizzes and the final exam will result in being locked out of this online training program, but the learner can repurchase and start back from the beginning.
Upon completing this Subpart O Motor Vehicles, Mechanized Equipment For Construction and the accompanying survey, you will receive an OSHA 1 card from the provider of this OSHA training on behalf of the Department of Labor.
Students who successfully complete the program will receive a completion card issued by the U.S. Department of Labor.
YOU MUST COMPLETE THE SURVEY AT THE END OF THIS TRAINING TO RECEIVE YOUR DOL CARD
outline1. Introduction
Motor Vehicles, Mechanized Equipment, and Marine Operations
Module Description
References
Get Site-Specific Training!
2. General Requirements
Equipment Attention
Tires
Suspended Loads
Case Study - Boom Crash
Lowering/Blocking
Controls/Parking
Batteries
Battery Charging
Cab Glass
3. General Requirements - B
Power Lines/Transmitters
Observer
Electrical Lines
Consider All Wires Energized
Work near Transmitter Towers
Fire Prevention
Rail Cars
4. Motor Vehicles
Coverage
Brakes/Lights
Lights
Rear View
Windows/Wipers
Pay Load and Tools
Seats/Belts
Dump Bodies
Fenders/Mud Flaps
Vehicle Inspection
5. Motor Vehicles and Safety
Safety on Public Roadways
Section 5(A)(1) of OSHA Act
Background and Trends
Worker Characteristics
Crash Characteristics
Occupants and Drivers
Promote
Fleet Management and More
Driver Performance
6. Earthmoving Equipment
1926.602
Seat Belts
Roadways/Grades/Ramps
Brakes
Fenders
ROPS
Audible Alarms
Scissor Point
Lifting/Hauling Equipment
Lifting and More
Industrial Trucks
Controls
Powered Industrial Trucks
Training Program
Refresher Training and Evaluation
Weather
Snow and Ice
In the Drink
7. Pile Driving
1926.603
Protections
Leads
Steam Hose
More General Requirements
Safe Work Practices
8. Site Clearing
1926.604
Rollover Guards
9. Marine Operations
Definitions
1926.605
Access to Barges
Working Surfaces of Barges
Commercial Diving
11. Dust Disturbance
Safety/Health/Environmental
In Many Communities …
Soils
What Is Dust?
Types of Dust
Sizes
Dust Control
12. Dust and Health
Greatest Concern
Health Hazard Factors
Pneumoconiosis
13. Dust Control
Dust Control
Prevention
Control
Pneumoconiosis
14. Fugitive Dust
Best Available Control Methods
Best Practical Methods
Monitoring
15. Summary
In This Module...
For Additional Information Benefits Upon completion of the Subpart O: Motor Vehicles, Mechanized Equipment course, workers will understand the safety requirements established in OSHA 29 CFR 1926, Subpart O, including safe use of pile driving, material handling, and site clearing equipment. Course participants will also be aware of the hazards of dust exposure and appropriate control measures to protect workers on-site.